eMylo WiFi Presence Sensor 1 Pack 24GHz mmWave Radar with Lux Light Sensor, white

Product description

Specification: Size: 494910.5 mm Input: DC 5V/1A Radar Frequency: 24G Radar Detection Range: 0-19.7FT (0-6M)Illuminance value: 0-3000 Lux Detection angle:>90 Wireless Protocol: Zigbee / 2.4G WiFi Functions 1. Adjustable Sensitivity and Distance You can adjust the distance and sensitivity according to actual situations, it can detect the movement of human or animals, it also can recognise the micro movement of local human body, even presence status of static human body like breathing. Note: The larger the value, the higher the sensitivity, the more accurate judgement. 2. Illuminance and Distance Indication With built-in illuminance sensor, enable it to measure the illuminance value around the environment. and when the sensor detects human presence, it can also measure the distance between the sensor and human body. 3. Intelligent Linkage You create linkage scenes with tuya other smart devices like light bulb, siren alarm,etc. For example,when human is detected, the siren alarm sounds,or when the illuminance value reaches certain range, light bulb wil turn on automatically. 4. Nobody time setting When the sensor detects someone has left if you need keep someone in the presence state for a period of time, you can set delay time to report, the APP will push nobody message after the setting time goes by. 5. Environment Self-learning you can learn the interference situation in the environment when nobody exist, to avoid false judgement of human state as much as possible. FAQ 1.The detection range of mmwave radar should avoid interference as much as possible, installation should avoid vibration interference from fan, air conditioner, plant, curtain, metal, water pipe,etc. 2. Make sure the sensor is at least 1 meter away from the router, otherwise, it is easy to be interferenced to cause false alarm. 3. If false alarm happens, please check whether have environment interference, or lower the sensitivity of motion detection tilI no false alarm.4. In micro-motion or static state, horizontal or slant side installation has lower false alarm rate and higher accuracy than ceiling installation. 5. Since the object to be measured and the radar is detected through relative radial movement, and the accuracy of radial movement detection is higher. Therefore,it is recommended that installation be more inclined to horizontal installation, if it's ceiling mounted,we advise motion detection. 6.Since the micro-motion or static state has small fluctuations in movement. If you need detect human boby micro-motion or static state accurately, it is recommended to set the sensitivity to 5x or above,the judgement of human state will be more accurate. 7. If the sensor detects human presence,but doesn't report the non-presence after the person leaves, you can turn down sensitivity and distance upper and lower limit for micro-motion detection. If it still does not work, adjust the sensitivity and distance upper and lower limit for motion detection..