Product description
Easy to add Bluetooth Function for your Cars and Trucks
All-In-One
Backlight Buttons
Smart Voice Assistant
Ultra Clear Handsfree Calls
Zero Hum(Static/Buzzing) Noise
Built-in Noise Isolator and Mic
Wireless HD Audio Streaming via Phone Apps.
Safe Phone Calls While Driving ; Enjoy Music While Driving
Wireless HD Audio Streaming
Music
Navigation
EBook
The audio from any Apps of smart phone
HiFi Sound - Signal to Noise Ratio up to 95.8dB
Built-in High Performance Noise Isolator
ZERO Hum noise?Static noise and Buzzing noise
No need add an extra ground loop noise isolator on Aux cable
Sound quality much much better than using and extra ground loop noise isolator on Aux cable
AAC Codecs HiFi Aux Bluetooth Car Kits
What You Get
SoundTek A1+ Bluetooth Receiver x 1
Cable Clips x 5
User Manual x 1
3M double-sided adhesive poron pad (for backup) x 1
Plug & Play Installation
Volume Adjustment (First Using)
The first, Adjust the volume of smart phone and SoundTek A1+ to max during phone call, then adjust the volume of car media system to right level.
The second, Adjust the volume of smart phone and SoundTek A1+ to max during voice assistant actived, and just keep the car volume same as phone call mode.
The third, Adjust the volume of smart phone or SoundTek A1+ to right level during play music, and just keep the car volume same as phone call mode.
Note: Above volume adjustment method only need done once for one smart phone, you also need do this if you paired a new smart phone.
Technical Specifications
Advanced Audio Codecs AAC?MP3?SBC
Signal to Noise Ratio > 95 dB
THD+N Ratio < 0.04 % (20Hz-20KHz)
Frequency Response +/-0.5 dB (20Hz-20KHz)
Audio Output Level 1 Vrms
Channel Balance < 0.1 dB
Crosstalk 80 dB
Noise Cancellation Yes (CVC noise cancellation & Wind noise reduction)
Bluetooth Range 10m / 33ft
Bluetooth Profile A2DP?AVRCP?HFP
Support Multi-Points Yes (support dual links)
Power Supply USB (DC5V)
Built-in Battery ? No (just using USB DC5V power, Safer)
Power Consumption < 0.1A (from USB DC5V power)
Audio Output 3.5mm Aux out male connector (just make sure your car have AUX port)
Product Size & Cable Length Product Size : 43mm x 43mm x 11mm Cable Length: 1.2m / 3.96ft
SoundTek A1+
This is a high end excellent sound stereo Aux Bluetooth car-kits receiver ,Using high performance Qualcomm Bluetooth chipset ,Works with Bluetooth devices and all cars with a 3.5mm AUX input. Stream audio from any phone apps through 3.5mm input in car stereo and enjoy your favorite music from your smart phones,Also making handsfree call
Advanced Audio Codecs
Support AAC?MP3?SBC audio decoder - better than CD quality
HiFi Audio - Excellent Sound
Premium Sound Quality, Aston Innovatons's noise free technology kill the hum/buzz/static/hiss noise, No need an extra ground loop noise isolator any more
Premium Audio experiences without compromise
Ultra Clear Handsfree Calls
Build-In high performance microphone, Qualcomm cVc noise reduction, Full-duplex HD voice processing, AGC algorithms, Excellent Handsfree Call Quality
Auto On
SoundTek A1+ will auto power on when start engine and recognizes the previous paired device and will re-connect it
Smart Backlit Buttons
All buttons have backlight LEDs, Which is much more easy and safer to use even at night ,Soft backlight without glare
Voice Assistant
Support voice assistant such as Siri, Google etc..
For iPhone to active Siri, Just try make sure Siri setting on iPhone side like below:
1). Enable [Press Home for Siri] 2). Enable [Allow Siri When Locked]
Travel and Talk
Use the SoundTek A1+ to make your car Bluetooth compatible, a complete handsfree solution. Play music from your phone, make and receive calls and more!
Simple Operation
Three buttons take care of all possible functions. Play and pause music, answer and hang-up the phone, skip forwards or backwards, Vol+ or Vol-
Cable Length
3.96ft /1.2m (from USB and Aux plug to SoundTek A1+ button place)
2ft / 0.6m (from USB to Aux plug)
Product Size : 43mm x 43mm x 11mm
What You Get
SoundTek A1+ Bluetooth Receiver x 1
Cable Clips x 5
User Manual x 1
3M double-sided adhesive poron pad (for backup) x 1