About this item:
- Compatible cameras: Fujifilm GFX 50R, X-T3, X-E1, XF10. Olympus E-M1 MARK II. Pentax *ist D, *ist DL, *ist DS, *ist DS2, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K 1; Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5; Contax 645, N1, NX, N Digial; Sigma Sd1
- This wireless shutter release timer set includes a Timer and a Receiver, can work as a timer and remote shutter release. The timing setting can be accurate to 0.1 seconds. Reduce camera shake and allows you to trigger your camera wirelessly up to 60 meters.
- Supports S (single shooting), C (continuous shooting), B (Bulb), 2S (2 seconds delay), Timer (timer mode): Under timer mode, delay timer, long-exposure timer interval timer, setting for the number of exposure and BKLN function is available
- Compatible cameras: Canon EOS R, EOS RP, 90D, Canon Rebel XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, SL1; Canon EOS 800D, 200D, 80D, 70D, 77D, 60D, 60Da, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 100D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6; PowerShot SX60 HS, G1X, G1X Mark II, G1X Mark III, G3 X, G5 X, G10, G11, G12, G15, G16
Product description
How to operate
Press MODE button to switch over S ( Single shooting ), C ( continuous shooting ), B ( bulb exposure ), 2s ( 2 second delay modes ) and Timer Mode.
When jump to TIMER (timer mode), press left and right button swith over Delay (Delay exposure), Long (long exposure) ,INTVL (interval), N (number), BKLN. Press SET button jump into the submenu/Confirm, you can change the number by pressing the Up button and the down button.
For wired and wireless remote control
It includes a Timer and a Receiver, can work as a intervalmeter and a wireless shutter release timer.
4 shutter release mode
Single shooting, 2 second delay modes, continuous shooting, bulb exposure and are available.
5 setting for timer shooting
Delay: A self timer before a photo is taken
Long exposure: A Programmable long exposure for cameras B Bulb Mode
Interval: the interval time between every shoots
Number: Set the number of exposures time (set to '- -' being unlimited times)
BKLN: When the BKLN mode is turn on, it allows a group of photos to be taken at automatically exponentially changing exposure times
Read more
The exposure time can be accurate to 0.1 seconds (minimum intervl time is fixed to 1 sec.)
You can program delay exposure, long exposure, interval, exposure number function together to capture the beautiful moments with repeat interval time and repeat times shooting
With BKLN function, you can set the exposure time and number, then the camera shoot a group of photos at automatically exponentially changing exposure time.
Read more
Specification
Transmission distance: 2.4GHz 60m+ (open space without interference)
Maximum number of shoots 1-199 photos programmable and - - being unlimited photos.
Batteries 2 x AA batteries (for Transmitter), 2 x AA batteries (for Receiver), Do not included in Package
Weight Transmitter 56.5g; receiver 37.5g
Dimension Transmitter - L 130.4mm X W 46.2mm X H 22mm; receiver - L 85mm X W 37.4mm X H 30.9mm
Cable length Not stretched 19.5 inches(50 cm); stretches to approximately max 59 inches (150 cm)
FQA
When you press the shutter button on Transmitter, the Receiver's light doesn't change to red and do not respond to Transmitter, that means it hasn't received the signal from the Transmitter. Please follow the below steps to set the Smart Code:
1. Turn on the transmitter and receiver. 2. Use a needle-like object to press into the code setting button on receiver, which will cause the LED on receiver to flash red and green light alternately for 25s. Press the shutter button on transmitter to reset the code during the code setting mode. When the code is successfully set, the LED on receiver will get back to normal mode, flashing green light. Normally, the frequency of transmitter and receiver will be pre-set in production. You can use the timer instantly.