Specifications & Details
| SKU | PIB0DL2XZ8DK |
|---|---|
| Item Weight | 0.142 kgs |
| Memory Storage Capacity | 8 TB |
| Compatible Devices | PCIe NVMe SSD |
| Max Number of Supported Devices | 2 |
| Data Transfer Rate | 4E+1 Gigabits Per Second |
| Manufacturer | WAVLINK |
| Package Dimensions | 6.38 x 4.17 x 1.77 inches |
| Item Weight | 0.142 kgs |
| Item model number | U41F |
Product description
WAVLINK 40Gbps USB4 NVMe PCIe SSD Enclosure -- RapidFire U41F
40Gbps USB4 Speed Support UP to 8TB SSD Fast Read & Write Speed Intelligent Chip
How to Install the SSD?
Step 1: Pull up the top cover to open the enclosure and insert the silicone buckle.
Step 2: Attach the thermal silicone pad to the SSD, then place the aluminum strip over it.
Step 3: Insert the SSD and adjust the silicone buckle to secure it.
Step 4: Finally, reattach the aluminum case to the enclosure.
Warm Tips:
1. The NVMe SSD is not included.
2. The performance might be limited on TBT3 and normal usb port. To get the advertised performance, the host should support TBT4 or USB4 and it should support 40Gbps.
3. This test result for Max.3800MB/s reading and Max.3800MB/s writing is the best result tested by our own test environment, and the specific effect is determined by the computer configuration and your SSD.
4. If the SSD is brand-new and unformatted, please perform partition installation so that the computer can read the data normally. If the SSD is formatted and has stored data, you have no need to perform partition installation because the computer can read the data normally.
5. Please ensure you remove the protective films from both the aluminum strip and the thermal silicone pad during installation.