Product description
Advantages of Hollyland Lark 150
Hollyland Lark150 is a compact 2.4GHz dual channel wireless lavalier microphone system with 2 transmitters/TXs, 1 receiver/RX, and a portable charging case. Its transmitters weighs only 0.72oz/20.5g, as small as a coin (L*W*H=1.45*1.45*0.69 inch). The talents can barely feel its existence whether clipping it on their collar or pocket. The transmission delay is less than 5ms, you don't have to worry about voice and video sync. The shooting distance can reach up to 100m line of sight range with stable and crystal clear audio transmission. Three working modes for you to choose: Mono, Stereo and Safety Tracks. Mono for 1 person, Stereo for 2 person, and Safety mode for outdoor shootings when audio-popping preventive measure is needed.
Portable Charging Case with Auto Pairing, Auto Charging Function
The charging case can charge the whole kit up to 2.5 times. It takes only 1.5h to recharge RX and TXs. After fully charged, TX can be used up to 4 hours and RX up to 7 hours. If you use one TX at a time, the whole system can work for 18 hours with the charging case. When taken out of the case, they are automatically turned on. When put inside, they are automatically paired and will start to charge if needed. Ready to use at anytime, anywhere.
Small and Light
The coin-sized mic weighs only 0.72oz/20.5g, as lightweight as a walnut. With built-in belt clip on TX and RX, the microphones can easily clip on any collar/lapel without pulling down your shirt, and the receiver can hold on to camera’s mount stably. The Lark 150 omnidirectional microphone also comes with 2 pairs of lavalier mics and furry wind-muffs. The wind-muffs are perfect to use in windy environment. You can choose different installation and audio input methods as you like.
Anti-vibration and Intelligent Noise Cancellation
You can still have stable voice recording when talents are moving around with the Hollyland anti-vibration function. And you don't have to worry too much about ambient noise since Lark 150 has intelligent Noise Cancellation function. It can filter out low-frequency environmental noise, making the sound pure and more relevant. This feature is very useful when shooting sports activities like yoga, working out, running, dancing and so on.
Two-way Mute Buttons & Real Time Monitoring
You can mute the mic from both the transmitters and receivers. It's easier to control what is being recorded. With real time monitoring function and OLED display, you can plug in your earphone on the receiver or your camera to listen, and do some adjustments timely. Lark 150 microphone system has 3 working modes; mono for one-person voice picking, stereo for 2 persons, and safety track mode to prevent pops (Right track is -6dB lower than the left one).
Fast Auto-pairing, Upgrade, Storage for the Whole System
The charging case is not only a power solution, you can get the kit paired, carry everything inside, and even upgrade the system by connecting the charging case to your computer using USB-C cable. The whole kit is automatically paired, and charged once put into the charging case. The OLED screen on the receiver shows the battery level of TX and RX. And the indicator lights help you understand their status.
Wide Compatibility and Using Scenario
The Lark 150 system is compatible with your audio recorder, DSLR cameras (Sony, Canon, etc.), camcorder, iPhone/iPad/Android smartphone, laptops, computer, etc. You can connect the receiver to your device using our TRS to TRS or TRS to TRRS cable that come with the package. It's perfect for voice recording scenario like YouTube, commercial, v-logging, interview, podcast, film making, church shooting and live streaming and so on. If you have any questions during use, please feel free to message us.
Note: If the Lark 150 System has not been used for some time, the transmitter/receiver/charging case may go into sleep mode automatically. This is normal to protect the battery, not defective. So if any unit cannot be recharged or turned on, please try the following steps to reset or update it first.
1. Reset it by using a needle to poke on the tiny hole on its side.
2. If the first step doesn’t work, please put the transmitters and receiver back to the charging case, long press one of the Mute buttons on the receiver to check if it's the latest version (V3.0.4.4).
3. If it’s not the latest version, please download the firmware online: bit.ly/lark150upgrade
Product Parameters
Interfaces TX: 3.5mm Audio Input Port Charging/Upgrading Contacts RX: 3.5 mm TRS Output Interface 3.5mm Headset Interface Charging/Upgrading Contacts Charging Case: USB Type-C Interface
Frequency Bandwidth 2.4GHz AFH
Built-In Mic Polar Pattern: Omnidirectional Frequency Response: 20Hz~20KHz
Lavalier Mic Polar Pattern: Omnidirectional Frequency Response: 20Hz~20KHz
Reference Audio Input Level -65 dBV
Maximum Input Sound Pressure 100dB SPL (1KHz@1m)
Dynamic Range 100 dBA
Polar Pattern Omnidirectional
Audio Output Change Range 21-State: 45dB
Transmission Latency 5ms
Battery Mode TX: 200mAh (0.76Wh) RX: 530mAh (1.96Wh) Charging Case: 3350mAh (12.16Wh)
Battery Life TX: 4.5h RX: 7.5h Charging Case: About 2.5 times (Charge 2 TX and 1 RX at the Same Time in Full Charged States)
Charging Time TX: 1.5h RX: 2h Charging Case: 2.5h
Firmware Upgrade Method PC
Dimensions TX: (L*W*H) 37*37*17.5mm RX: (L*W*H) 67*41*20.5mm Charging Case: (L*W*H) 121*61*43.5mm
Weight TX: 20.5g RX: 51g Charging Case: 227.5g
CONNECT
Connect your iPhone to the Lark 150
Note: The Lightning to 3.5mm Headphone Jack Adapter is not included on the package. We recommend that you buy from the Apple official stores.
Warm Tips:
After connected to your phone, long-press the left volume knob on the Lark 150 receiver to switch to Stereo Mode. So that the noise is at the lowest.
Set the volume to 10-13 by adjusting the two volume knobs on the Lark 150 receiver. Please keep the volume under 13 to avoid audio-popping.
Connect your Android Phone to the Lark 150
Note: The USB-C to 3.5mm Headphone Jack Adapter is not included on the package. We recommend that you buy from the Corresponding store.
Warm Tips:
After connected to your phone, long-press the left volume knob on the Lark 150 receiver to switch to Stereo Mode. So that the noise is at the lowest.
Set the volume to 10-13 by adjusting the two volume knobs on the Lark 150 receiver. Please keep the volume under 13 to avoid audio-popping.
Connect your Camera to the Lark 150
Warm Tips:
Please turn off the +48V Phantom power on the camera/switcher before connecting to the Lark 150. If not, the device will be damaged.
Please set the camera/camcorder volume to the lowest, and set the Lark 150 to about 12-15, so that you can get the best audio with less device noise.
Connect your Android Phone(3.5mm) to the Lark 150
Use Grey 3.5mm TRRS Male.
Package include.