JJC Radio Wireless Remote Control Shutter Release for Nikon Z6III Z6II Z7II Z5 Z6 Z7 D750 D780 D7500 D7200 D5300 D5600 D5500 D3300 D3200 D610 D600 Df D7100 D7000 D5200 D5100 D5000 P1000 & More Camera

Product description

This Wireless Remote is designed for cameras that has a remote shutter socket. The system works at a 433MHZ frequency and has 16 available channels. In addition, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters / 100 ft. The transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot/bulb lock.
Compatible with Select Nikon Cameras:
Nikon Z5 / Z6 / Z6 II / Z6 III / Z7 / Z7 II / D780 / D750 / D610 / D600 / D7500 / D7200 / D7100 / D7000 / D5600 / D5500 / D5300 / D5200 / D5100 / D5000 / D3300 / D3200 / D3100 / Df / D90 (Not for Nikon D3500 and D3400)
Nikon Coolpix P1000 / P7800 / P7700
Important - How to use:
1. Install the CR-2 battery to the receiver and 23A battery to the transmitter. (Make sure to remove the plastic protective paper on the battery before installation)
2. Set the receiver and transmitter to the same channel (Normally the channel is already matched when you receive the package, so actually you don't need to set it, but if you ever reset the channel, make sure they are the same)
3. Once the batteries are properly installed and the channels are matched, when you press the shutter button on the transmitter, both the LED bulb on the transmitter and receiver will light up. (If not, please check if the battery is installed correctly or the battery is dead)
4. Once the transmitter matches the receiver, connect the receiver to the camera via the camera connecting cable which is included in the package, then set the transmitter into the working mode you want and finally press the shutter button to take a photo wirelessly.
Attention Please: This remote does not work when camera is in movie mode, so it cannot control video start and stop!
1/4"-20 Screw Hole on Receiver
The 1/4"-20 screw hole on the back of receiver allows you to mount the receiver on tripod or other devices with 1/4"-20 screw when camera without standard hot shoe or hot shoe is occupied.
16 Channels, Easy to Pair
This remote works at 433MHZ frequency and has 16 available channels. There are 4 different channel selectors on the back of transmitter and receiver, just need to push the channel selector in the same number and direction to complete the pairing.
Package Includes
Transmitter x 1
Receiver x 1
CR-2 battery x 1
23A battery x 1
Camera connecting cord x 1
Remote Shutter Release Cord
Wired Intervalometer Timer Remote
Wireless Intervalometer Timer Remote
Dual-Slot Battery Charger
Macro Extension Tube
Camera Hand Strap
Buying Options
Buying Options
Buying Options
Buying Options
Buying Options
Buying Options
Customer Reviews
4,534
2,468
61
444
858
445
Type Remote Shutter Release Cord Wired Intervalometer Timer Remote Wireless Intervalometer Timer Remote Dual-Slot Battery Charger Macro Extension Tube for Nikon Camera Camera Hand Strap